Tutorial: Twitterlove Bird, from sketch to vector in Photoshop and Illustrator
Posted on November 16, 2008 at 9:45pm
Following the recent launch of SoulTweet, Graham Smith made a call out for any illustrators to help out with the site.
In a few minutes that I had spare, I doodled a couple of birds to offer up for use, and sent across the best of the two for consideration. It didn’t get taken up, so rather than let a sketch go to waste, I decided I’d illustrate it for a tutorial of how I like to use Illustrator.
This is also the method that I used to create the cover images for the Adam Eason CDs.
Step 1:
Firstly, I took a photo of the sketch and loaded it into Photoshop (I’ve not installed my scanner yet since I reformatted my PC, hence taking a photo and not a scan). This first image is the sketch that I submitted.
Step 2:
I wasn’t quite happy with a few bits in the first draft — the tail was too short, and the eyes made the bird look stoned! So, adding a couple of new layers in Photoshop, I used white and black brushes to paint over the parts I wanted to edit. At this stage, I also decided to group the sketch layers and set that to Multiply, so that I could throw down some colour underneath, to get a feel for the final look.
Step 3:
Happy with the last stage, I loaded up Illustrator and placed the sketch into the bottom layer. I locked it and set it to 50% opacity, so that I could work over the top of it.
I then began to use the Pen tool to loosely draw the bird. I say ‘loosely’ here — it’s best to be as accurate as possible from the start, but at this stage there’s still lots of time for refinement. Just getting it drawn is the first priority.
As you can see, I made quite a few changes to the sketch here. I didn’t like the feet clutching onto a branch — I thought it would make a stronger and more versatile image to have the bird standing on the ground, reaching out to pass the heart, so I reworked his feet. The eyes were an accidental discovery — I created the circles for the basis of the eyes, and then decided that I preferred the look of them being wide open, so it stayed like that. The mouth got tweaked a little as well, to look less awkward.
Step 4:
Here’s the lengthy part. This is where I take my basic lines, tidy up the curves, so that everything flows nicely, and then where I make the nice, varied line-widths.
So, using the white arrow Direct Selection Tool (press A) and the Convert Anchor Point Tool (Shift-C), modify any lines that look like they’ve got any unintentional angles and points within them, so that they curve smoothly.
Next, to create the variable width line, lock all objects and layers except the specific line you want to work on. Select it (Ctrl-A / Cmd-A), copy it (Ctrl-C / Cmd-C), and paste behind (Ctrl-B / Cmd-B). You now have two copies of that line, one on top of the other. Using the Direct Selection Tool, select one end of both lines (so you have two anchors in your selection. Join them with Ctrl-J (or Cmd-J) and select ‘Corner’.
Now you’ve turned the two lines into an outlined shape. Invert the fill and stroke with Shift-X to set black as the fill. Now if you move any other anchor points on the object, you’ll see the shape of the line begin to emerge. This takes a fair bit of work, playing with the curves, to get the line to look smooth throughout, but that’s the simplest and easiest technique that I’ve found for varied widths. If you don’t want the line to come to a point, simply seperate the end anchors before joining.
Step 5:
At this point, just before adding colour, I then take a look at all of the lines and, using the Knife tool, slice off any segments that are overlapping — i.e. if a line should be receding behind another, then that is the one that’ll get chopped up (TIP: Hold Alt/Option when you start to use the Knife tool, and you’ll get a straight line).
Then just delete (or hide, if you like) the sections of line that you won’t need to show in the final image.
Step 6:
Not much work to go now! I now create a new ‘Colour’ layer beneath the ‘Lines’ layer and roughly block out the main sections of colour as set out in my Photoshop sketch (it doesn’t need to be neat, as the edges of these block are hidden behind the black lines).
Step 7:
Time to add the finishing touches… Create a new ‘Shadows’ layer above ‘Colours’, and select shades of your main colour blocks. Draw out the shapes of the shadows as sketched in Step 2. You can also add a ‘Highlights’ layer, as I did for the heart. Depending on the number of shadow/highlight depths you want, this can either be a very short step or an incredibly long one.
To add the final touches, I drew the stripes on the bird’s legs in a dark brown, and set the edge of the tongue in a dark pink, to take some focus away from it.
Final image:
Categories: Illustration, Illustrator, Photoshop, Tutorial.
Bookmark: Digg, Delicious, StumbleUpon, Design Float.
Comments on Tutorial: Twitterlove Bird, from sketch to vector in Photoshop and Illustrator
This is the first tutorial I’ve written, so I’d love to hear your thoughts on it! Things like, what have I missed out that would be helpful, and what could be omitted? Cheers for reading!
Posted by Rob Barrett (45 comments) on 16th November, 2008 at 9:47 pm.
Great tutorial! And I love your twitter bird!
Posted by Angie Bowen (1 comments) on 16th November, 2008 at 9:55 pm.
Nice little tut! :)
You have have used the pathfinder to cut the paths but it can be tricky sometimes.
Posted by mayhemstudios (2 comments) on 16th November, 2008 at 10:40 pm.
this is really cool. thanks for sharing your skills.
Posted by kyle steed (1 comments) on 16th November, 2008 at 10:40 pm.
Angie, Kyle: Thanks for the kind words!
Mayhemstudios: Cheers, man :) Yeah, Pathfinder’s a valid way of doing Step 5 as well. I prefer my way, in that the edge of the covered line is far away from the edge of the overlaying line. Sometimes with Pathfinder (especially when the lines are different colours) — although it should be perfect — I find that a tiny bit of the underlaying line will show through, just at the very edge.
Posted by Rob Barrett (45 comments) on 17th November, 2008 at 12:40 am.
Nice Tutorial
Posted by rejidesigner (1 comments) on 17th November, 2008 at 5:56 am.
Looks great!
Posted by Colorburned (1 comments) on 17th November, 2008 at 10:18 am.
Very nice tutorial, well done.
Posted by Shanna Korby (1 comments) on 17th November, 2008 at 6:18 pm.
Nice job! Keep showing. I like to read how others are creating their art on the computer. Thanks!
Posted by Your Name (1 comments) on 17th November, 2008 at 6:21 pm.
This is one cool tutorial. Can see you spent some time doing it. Out of curiosity, did the tutorial take longer than the actual illustration?
Best
Graham
Posted by Graham Smith (1 comments) on 17th November, 2008 at 9:23 pm.
Good Illustrator tutorial. The Twitter Bird is cute!
Posted by Brad Strickland (1 comments) on 17th November, 2008 at 9:24 pm.
rejidesigner, Colorburned, Shanna, Your Name, Brad: Thanks guys, glad you enjoyed it! Any suggestions for future improvements?
Graham: Haha, cheers man! Yeah, the tutorial took considerably longer — I’ve been using this technique for a few years now, so I’ve got it down to a fine art now! The lengthy bit was afterwards, taking the screenshots, choosing what to highlight, getting the wording clear… Much trickier!
Posted by Rob Barrett (45 comments) on 17th November, 2008 at 10:11 pm.
Great tut, i need to use more illustrator so ill probably learn something here.
Posted by Max (2 comments) on 18th November, 2008 at 12:03 am.
Very cute tut! :)
Posted by Marnie B (1 comments) on 18th November, 2008 at 5:37 am.
Max: Thanks! I’ll hopefully get some more tuts done soon, given the positive response to this one!
Marnie: Haha, cheers! Thanks for taking the time to look! I like your site, by the way — it’s got some great articles on there :-)
Posted by Rob Barrett (45 comments) on 18th November, 2008 at 11:20 pm.
Great tutorial. Wonderful love bird!
Posted by AJ Troxell (2 comments) on 19th November, 2008 at 5:26 pm.
Nice tutorial. I have Illustrator but barely ever open it. I need to get my old sketch book out and scan some stuff :) Thanks for the tutorial.
Posted by Mike Smith (1 comments) on 20th November, 2008 at 1:03 am.
Nice tutorial Rob, the animated gifs work really well to show the key steps in action, nice touch :)
Posted by Greg Findley (5 comments) on 23rd November, 2008 at 6:37 pm.
AJ, Mike: Thanks for commenting, dudes! Yeah, get scanning! :-D
Greg: Cheers man. Yeah, I figured that the animated gifs would be far more effective than me rambling on trying to describe the process more than I did!
Posted by Rob Barrett (45 comments) on 24th November, 2008 at 1:09 am.
very good, thanks
Posted by sivas resimleri (1 comments) on 6th March, 2009 at 6:15 pm.
Thanks, Sivas!
Posted by Rob Barrett (45 comments) on 15th March, 2009 at 1:30 am.
Delightful image and presentation of the development and creation of Twitterlove Bird. Tweet-tweet! Debby
My Home Page
My Hubs
Posted by Debby Bruck (1 comments) on 22nd March, 2009 at 2:06 am.
The BLUEBIRD OF HAPPINESS
Posted by Flu-Bird (1 comments) on 4th April, 2009 at 4:49 am.
just curious…
any reason why, in step 4 do you go through that fairly lengthy copy/paste/move procedure on your lines to convert them to outlined shapes – instead of just using ‘object > path > outline stroke’ and taking it from there?
Posted by madra (1 comments) on 8th April, 2009 at 8:44 am.
Debby: Thanks again for including me in your Hub!
Flu-Bird: Cheers mate, glad you like it! :-D
Madra: I guess, largely, it’s a case of preference. I don’t find that it takes me much time at all to do the Copy/Paste/Move sequence (keyboard shortcuts make the difference!).
I’d say for lines that come to a point, you’re better off using my method, but for lines with squared-off ends, the Outline Stroke method might well be more suited to the job.
Posted by Rob Barrett (45 comments) on 8th April, 2009 at 12:14 pm.
This is really a great stuff for sharing.keep it up .Thanks for sharing,
ugg sundance black
Posted by besttrendsshop (1 comments) on 6th November, 2009 at 9:20 am.
Excellent tutorial! Thanks!
Posted by Abhisek (1 comments) on 6th December, 2009 at 1:14 pm.
Excellent tutorial. This kind of post are really the post I’m looking for because I’m learning a lot from it.
Posted by ohare airport limo service (7 comments) on 23rd April, 2010 at 9:13 am.
Trackbacks for Tutorial: Twitterlove Bird, from sketch to vector in Photoshop and Illustrator
Linked from Drawing Twitter Bird Love Vector Using Photoshop and Illustrator | Design Inspiration and Resource on 17th November, 2008 at 3:10 pm.
Linked from Best of the Web – November 2008 - VECTORTUTS on 30th November, 2008 at 2:53 pm.
Linked from I migliori 5 tutorial di Novembre | § Mondo Grafica on 1st December, 2008 at 9:35 am.
Linked from Vectips Monthly Roundup: November | Vectips on 2nd December, 2008 at 7:12 pm.
Linked from Vectips Monthly Roundup: November | Castup on 29th December, 2008 at 9:55 am.
Linked from 80 Best-Of Adobe Illustrator Tutorials, Brushes, .EPSs and Resources | Web2.0 on 19th January, 2009 at 8:03 pm.
Linked from 80 Best-Of Adobe Illustrator Tutorials, Brushes, .EPSs and Resources | Web Hosting and Domains on 21st January, 2009 at 1:15 pm.
Linked from Twitterlove Bird, from sketch to vector « Sharebrain on 5th February, 2009 at 9:20 am.
Linked from 125+ Ultimate Round-Up of Illustrator Tutorials | Showcases | instantShift on 18th March, 2009 at 7:22 pm.
Linked from 80 Best-Of Adobe Illustrator Tutorials, Brushes, .EPSs and Resources | Noupe on 8th July, 2009 at 9:26 pm.
Linked from 25 High-Quality, Adobe Illustrator Tutorials for Creating Cute Characters - Webreweries.com on 21st August, 2009 at 7:29 am.
Linked from 25 High-Quality, Adobe Illustrator Tutorials for Creating Cute Characters : Webby Tutos on 21st August, 2009 at 1:28 pm.
Linked from 25 High-Quality, Adobe Illustrator Tutorials for Creating Cute Characters | huibit05.com on 21st August, 2009 at 2:55 pm.
Linked from 50 Illustrator Cartoon Tutorials | Design Reviver on 24th August, 2009 at 7:06 pm.
Linked from 50 Illustrator Cartoon Tutorials - Programming Blog on 24th August, 2009 at 11:38 pm.
Linked from 25 High-??Quality, Adobe Illustrator Tutorials for Creating Cute Characters « Why Limit Media on 26th August, 2009 at 12:52 am.
Linked from 80 Best-Of Adobe Illustrator Tutorials, Brushes, .EPSs and Resources | huibit05.com on 3rd October, 2009 at 1:45 am.
Linked from 45+ Adobe Illustrator Tutorials for Creating Cartoon Character Illustrations | Naldz Graphics on 4th October, 2009 at 1:42 pm.
Linked from 45+ Adobe Illustrator Tutorials for Creating Cartoon Character Illustrations | huibit05.com on 5th October, 2009 at 2:47 pm.
Linked from 45+ Adobe Illustrator Tutorials for Creating Cartoon Character Illustrations | Naldz Graphics « Qwerty98311’s Weblog on 7th October, 2009 at 8:24 am.
Linked from 50 Illustrator Cartoon Tutorials | Amazing and Inspiring Design on 2nd November, 2009 at 10:46 am.
Linked from 40 ?????????? ??? ???????? ?????????????????? ??????????? | ??????-?????? ?1. on 2nd December, 2009 at 9:43 pm.
Linked from 40 best illustrator tutorials plus websites for illustrator tutorials | Web and designers | Complete resource platform for web designers and developers on 3rd December, 2009 at 1:15 pm.
Linked from My first attempt at a twitter bird | Leah Bulloch on 5th January, 2010 at 6:29 am.
Linked from 40 best illustrator tutorials plus websites for illustrator tutorials « Free Templates and theme on 19th February, 2010 at 3:27 pm.
Linked from 25 High-Quality, Adobe Illustrator Tutorials for Creating Cute Characters | LearnersTutorials on 10th March, 2010 at 1:45 pm.
Linked from 25 Adobe Illustrator Tutorials for creating cute and funny characters | YourTutorialsBox.com on 25th March, 2010 at 8:56 am.
Linked from Drawing Animals – 30 Great Illustrator Tutorials | Designer77 on 22nd May, 2010 at 6:43 am.
Leave a Comment